Your Best Choice for Furnace Repair and Air Conditioner Repair in Brighton MI (33)

Boiler tune up, Lennox boiler

Lennox high efficiency furnace tune up

Did a furnace tune up on a G27M4 I cleaned the burners flame sensor and burner orifices, cleared all hoses inside the furnace checked the air filter and water panel. Checked the amp draw, tested the ignitor ran a combustion analysis and this furnace is good to go

Lennox high efficiency furnace tune up with aprilaire 213 media and humidifier water panel #35

Did a double furnace tune up on a Lennox G51MP and a Lennox G61MP. I changed the thermostat batteries cleared the condensate drains cleared all the hoses inside both furnaces visually inspected all the wiring inside both furnaces changed both air filters. Cleaned the burners, flame sensors and burner orifices. Tested both ignitor and checked the amp draw on both blower and inducer motors. Ran a combustion analysis on both and these furnaces are good to go.

Installation of a Lennox el180 furnace with a April aire air cleaner and t-stat

Did a yearly maintenance on a Lennox G61 furnace, I cleaned the burners flame sensor and burner orifices changed the thermostat batteries, cleared the condensate drain, cleared all the hoses inside the furnace, visually inspected all the wiring inside the furnace, tested the ignitor, checked the amp draw on the blower and inducer motor ran a combustion analysis and this furnace is good to go

Did the yearly maintenance on a SLP98 Lennox furnace. Changed the air filter cleaned the burners and flame sensor tested the ignitor checked the amp draw on the blower and inducer motors cleared the condensate drain cleared all hoses inside the furnace visually inspected all the wiring inside the furnace ran a combustion analysis and this furnace is good to go

Did a utility tune up on a Lennox G61MPV furnace, cleared the condensate drain tested the amp draw cleaned the burners, flame sensor and orifices. Tested the ignitor ran a combustion analysis and this furnace is good to go.

I did a yearly maintenance tune up on a Lennox EL180 furnace, cleared the condensate drain and all the hoses cleaned the burners, flame sensor, and burner orifices, changed the air filter and thermostat batteries ran a combustion analysis and this furnace is good to go!

Installation of a Lennox el180 furnace with a humidifier,air cleaner and t-stat

Repair Bryant gas fired furnace

Did a yearly tune up on a G61MPV Lennox furnace. Changed the air filter, cleared the condensate drain and all hoses inside the furnace, visually inspected all wiring inside the furnace, cleaned the burners, flame sensor. I also cleaned and inspected the burner orifices, then ran a combustion analysis and this furnace is in perfect operating condition at this time.

Installation of a Lennox el180 furnace with air cleaner, humidifier and t-stat

Renove and clean flame sensor on a lennox G26

Did a tune up on a Bryant 350MAV furnace changed the humidifier pad checked T-stat batteries checked the air filter cleared the condensate drain and all the hoses inside the furnace visually inspected all the wiring inside the furnace cleaned the burners, flame sensor, and the burner orifices. Ran a combustion analysis. This furnace is good to go.

Lennox high efficiency furnace tune up

Lennox high efficiency furnace tune up with Lennox humidifier service

Lennox high efficiency furnace tune up with Lennox media x6773 replacement

Did a tune up on a G60 furnace. Changed the filter cleared the hoses inside cleared the condensate drain cleaned the burners and flame sensor. Cleaned and inspected the burner orifices and ran a combustion analysis. This furnace is good to go!

Did a tune up on a Lennox G60 furnace. I changed the filter and W.P. cleared the condensate drain cleared all the hoses inside the furnace cleaned the burners cleaned the flame sensor, cleaned and inspected the burner orifices and ran a combustion analysis. This furnace is good to go!

Did a tune up on an Amana GUI090B30B furnace and we had no surprises I cleaned the burners and flame sensor changed the humidifier pad and ran a combustion analysis and this furnace is good for another year

Utility tune up with consumers rebate on a Bryant furnace. I changed the W.P. and cleaned the burners and flame sensor cleared the condensate checked the air filter. Ran a pre and post service combustion test and this unit is good to go!

Replaced an ignition control board and did a tune up on a G61MPV. Cleaned the burners did a combustion test. This furnace gets the green light from me.

Installation of a Lennox sl280 furnace and a xc13 air conditioner with a Lennox s30 t-stat